Eternabond Roof Seal Black Tape 50mm X 15.2 Mtrs

Commercial roof & leak repair tape – RoofSeal/OneStep tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs.

RoofSeal/OneStep bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, aged PVC, CSPE/Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, Galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

Dimensions

• Roll: W50 x L15.2m

Features

• For use on virtually all roofs

• UV stable backing

• One-step permanent repair system

• Creates a waterproof, moisture, and air tight barrier with no additional sealing required

• Remains flexible to temperatures as low as -57°C making it virtually impossible to thermally shock the seam causing a leak

• Seals to itself so it can be cut and folded around an object

• Colour: black

Adhesion 9 kilos

Application temperature 66C to -29C ambient

Elongation >700% +/- 100

Low temperature flexibility 12.7mm radius at -34.4C

Permanence .001 perms maximum

Pliability No cracks in membrane

Shelf life up to 5 years

Temperature flexibility range 57C – >93.3C

Tensile Break PSI 31 (kpa)

Total thickness 0.9 mils

Water Vapor Test (ASTME 96B) .005 grms/24

Surface preparation Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

Application Install RoofSeal/OneStep over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or a steel roller to activate bonding process. This material may be applied to clean dry surfaces from 66°C to -29°C ambient. Treat surface with EternaPrime for installations from 5°C to -29°C ambient.